EPH-V11 | Triaxial Wireless Vibration Sensor – High G’s


EPH-V11 | Triaxial Wireless Vibration Sensor – High G’s

Phantom Expert is a Triaxial Wireless Vibration Sensor able to send 3 simultaneous FFT and Time waveform recordings at once.

Also, our Wireless Vibration Sensor wake up on high vibration levels in order to send data and alarms.
As an additional value, our Wireless Vibration Sensor have a built-in integrator, as a result, it can internally calculate velocity parameters for alarms. This way, RMS values ​​can be sent as well with a selectable periodicity.

Condition Monitoring & Industrial Automation | Modbus

Wireless Modbus Vibration Sensor — EPH Sensors include Modbus Protocol for industrial applications. Compatible with Condition Monitoring systems, Scada Systems PLC etc.
Modbus is the most important Standard for Industrial Communication Protocol.



  • Full waveform and spectrum data
  • Programmable Internal RMS Trigger
  • Selectable measurement range up to 32G
  • Configurable Alarm interval
  • Standby mode and long battery life
  • Selectable Recording time 1s / 2s / 4s / 8s / 16s
  • Configurable Measurement Interval
  • Speed + Vibration Integration
  • Configure your sensor using your mobile
  • IP67 Design for protection from liquid and dust


Part Number EPH-V11
Sensor MEMS Tri-axis accelerometer
Frequency Range (@25600 SR) 10kHz (x,y); 5.1kHz (z)
Dynamic Range 8 / 16 / 32 G
Internal Temp. Accuracy ±5°C
Status (Every 5min) Internal RMS, Battery, Temperature, Alarm
Recording Time (s) 1 2 4 8 16
Sample Rate (Hz) 25600 12800 6400 3200 1600
Max Frequency (Hz) 10,000 5000 2500 1250 625
Lines of Resolution 6400
Data Interval 10 minutes Configurable or Specific Daytime
Alarm monitoring 2 – 120 sec.
Spectral Noise 630 µg/√Hz


Wireless Protocol Bluetooth BLE 5.0 / Modbus via Gateway
Operating Frequency 2.4 GHz
Power Output -4dBm to +8dBm
Wireless Range 100m Line sight
Software Compatibility DigivibeMX version Phantom, M30, WiSER VIBE
Firmware Updates via Phantom Manager app (Available for iOS and Android)


Lithium battery mod. “1/6D” – 3.7V – 1.7Ah
Battery Life Time Up to 100,000 measurements.
Standby mode if Gateway not detected


Dimensions (d x h) 48 x 34 mm
Resistance to Shocks 5000 g
Weight 177 gr
Enclosure Material ABS / Stainless Steel
Protection Rating Water and dust resistant IP67
Fixture Fastener 1/4-28 UNF


Base Temperature Range  -40 to +85 °C (-40 to +185 °F)

Additional information

Weight 0.18 kg

There are no reviews yet.

Be the first to review “Wireless Vibration Sensor”